CHBNT - 316 LIME
- MSDS: CHBNT
- Manufacturer: ESAB GROUP INC
- Product Name: 316 LIME
- National Stock Number: 3439-00N085388
Product Identification
Product ID:316 LIME
MSDS Date:01/31/1997
FSC:3439
NIIN:00N085388
MSDS Number: CHBNT
Responsible Party
HANOVER, PA 17331
US
Emergency Phone: 717-637-8911
Info Phone: 717-637-8911
Cage: HO829
Contractor
Telephone: 717-637-8911
Cage: HO829
Ingredients
MANGANESE (SARA 313)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 2%
OSHA PEL C 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST
NICKEL (SARA 313) (CERCLA)
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 9-11%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3
CHROMIUM (SARA 313) (CERCLA)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 14-16%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
CALCIUM FLUORIDE (AS F); (CAF2)
CAS: 7789-75-5
RTECS: EW1760000
OSHA PEL 2.5 MG/M3 (MFR)
ACGIH TLV: 2.5 MG/M3 (MFR)
CALCIUM CARBONATE; (CACO3)
CAS: 1317-65-3
RTECS: EV9580000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
SILICA, CRYSTALLINE - QUARTZ; (SIO2)
CAS: 14808-60-7
RTECS: VV7330000
OSHA PEL SEE TABLE Z-3
ACGIH TLV: 0.1 MG/M3 RDUST
SILICON; (SI)
CAS: 7440-21-3
RTECS: VW0400000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
SILICIC ACID (H2SIO3), DISODIUM SALT
CAS: 6834-92-0
RTECS: VV9275000
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
SILICATE BINDERS
CAS: 10006-28-7
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
MOLYBDENUM
CAS: 7439-98-7
RTECS: QA4680000
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM
IRON
CAS: 7439-89-6
RTECS: NO4565500
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3 (MFR)
VOLAT, RXN/OXIDATION OF INGS, PLUS THOSE
RTECS: 9999999ZZ
REASONABLY EXPECTED DECOMP PRODS FROM NORM USE OF
RTECS: 9999999ZZ
MATLS LISTED IN INGS SECTION, AS WELL AS CARBON
RTECS: 9999999ZZ
WAY TO DETERMINE TRUE IDENTITY OF DECOMP PRODS IS
RTECS: 9999999ZZ
IARC
RTECS: 9999999ZZ
ANTICIPATED TO BE CARCINOGEN.
RTECS: 9999999ZZ
CHEST PAIN. CHROMIUM/CHROMATE IN FUME CAN
RTECS: 9999999ZZ
FUME CAN CAUSE METALLIC TASTE, NAUS, TIGHTNESS OF
RTECS: 9999999ZZ
CONTAMINANTS MAY LEAD TO THEIR ACCUM IN LUNGS, A
RTECS: 9999999ZZ
SEV OF CHANGES IS PROPORTIONAL TO LENGTH OF EXPOS.
RTECS: 9999999ZZ
REDUCED LUNG FUNC/DISEASE. IN ADDN, CHANGES ON
RTECS: 9999999ZZ
ETC. NICKEL & CHROMIUM ARE CONSIDERED CARCIN. LONG
RTECS: 9999999ZZ
FIBROSIS & EDEMA. OVEREXP TO MANGANESE CMPDS MAY
RTECS: 9999999ZZ
MUSCULAR WEAKNESS, EMOTIONAL DISTURBANCES AND
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ELEC ARC WORKING MAY CREATE ONE/MORE
OF THE FOLLOWING HLTH/PHYSICAL HAZS. FUMES & GASES CAN BE DANGEROUS
TO YOUR HLTH. ELEC SHOCK CAN KILL. ARC RAYS CAN INJURE EYES & BURN
SKIN. NOISE CAN DMG HEARING. WHEN THESE PRODS ARE USED AS REC BY
MFR, & VENT MAINTAINS EXPOS TO DECOMP PRODS BELOW LIMITS REC, (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NICKEL: IARC MONO, VOL 49, PG 257, 1990:
GROUP 2B. NTP 7TH ANNUAL RPT ON CARCINS, 1994: ANTIC TO BE CARCIN.
(ING 16)
Effects of Overexposure:HLTH HAZ: OVEREXP IS UNLIKELY. ACUTE OVEREXP TO
GASES, FUMES & DUSTS MAY INCL IRRIT OF EYES, LUNGS, NOSE & THROAT.
SOME TOX GASES ASSOC W/WELDING MAY CAUSE PULM EDEMA, ASPHY & DEATH.
ACUTE OVEREXP MAY INCL SIGNS & SYMPS SUCH AS WATERY EYES, NOSE &
THROAT IRRIT, HDCH, DIZZ, DFCLTY IN BRTHG, FREQUENT COUGHING,
OR(ING 18)
Medical Cond Aggravated by Exposure:PERS W/ALLERGIES/IMPAIRED RESP
FUNCTION MAY HAVE SYMPS WORSENED BY EXPOS TO WELDING FUMES.
HOWEVER, SUCH REACTION CANNOT BE PREDICTED DUE TO VARIATION IN
COMPOSITION & QUANTITY OF DECOMPOSITION PRODS.
First Aid
First Aid:USE FIRST AID TECHNIQUES REC BY RED CROSS. INHAL:IF BRTHG
DFCLT GIVE OXYGEN & CALL MD. ELEC SHOCK:DISCONNECT & TURN OFF
POWER. IF NOT BRTHG GIVE MOUTH-TO-MOUTH. IF NO DETECTABLE PULSE
GIVE CPR. IMMED CALL MD. ARC BURN:APPLY COLD, CLEAN COMPRESSES &
CALL MD. EYES:FLUSH W/POTABLE WATER FOR AT LEAST 15 MIN. SEE MD .
SKIN:FLUSH W/COPIOUS AMTS OF WATER. SEE MD . INGEST:CALL MD IMMED .
Fire Fighting
Extinguishing Media:PROD WILL NOT BURN. HOWEVER, WELDING ARCS & SPKS
CAN IGNITE COMBUST & FLAM MATLS. USE EXTING MEDIA REC FOR (SUP DAT)
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:AS SHIPPED, THESE PRODUCTS ARE
NON-FLAMMABLE, NON-EXPLOSIVE, NON-REACTIVE, AND NON-HAZARDOUS. ONLY
THE PACKAGING FOR THIS PRODUCT WILL BURN.
Accidental Release
Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:TRAIN THE WELDER NOT TO TOUCH LIVE
ELECTRICAL PARTS, TO INSULATE HIMSELF FROM WORK AND GROUND, AND TO
KEEP HIS HEAD OUT OF FUMES.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS & PREC LABEL ON
PROD. SEE AMERICAN NATL STD Z-49.1, "SFTY IN WELDING & CUTTING",
PUBLISHED BY AMERICAN WELDING SOCIETY, & OSHA PUBLICATION 2206
(29CFR 1910). CONT NEHC FOR MORE SPECIFIC INFO .
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC/BOTH, TO KEEP FUMES &
GASES BELOW TLV IN WORKER'S BREATHING ZONE & GEN ARC AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH AND DELUGE
SHOWER . ARM PROTECTORS, APRONS, HATS, DARK CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: BURNING MATLS & FIRE SITUATION. SEE ANSI Z49.1 "SFTY IN
WELDING & CUTTING" & "SAFE PRACT" CODE: SP, PUBLISHED BY AMERICAN
WELDING SOCIETY, P.O. BOX 351040, MIAMI, FL 33135, & NFPA 51B "C
UTTING & WELDING PROCESSES", PUBLISHED BY NATL FIRE PROT ASSOC,
BATTERYMARCH PARK, QUINCY, MA 02269 FOR ADDNL INFO.
Chemical Properties
HCC:T6
Appearance and Odor:SOLID STAINLESS STEEL CORE WIRE WITH FLUX COATING,
ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. DECOMP PRODS OF NORM OPERATION INCL THOSE
ORIGINATING FROM (ING 12)
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER, OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE A ND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.